dimensions are shown in mm (inch) dimensions subject to change 4 part number description type n offset mounting w/boss package qty. per 127040-2382 dicmj-68s-spc-m06 standard 0 offset smt no tape (56mm) 2500 127040-2331 dicmj-68s-spc-m05 standard 0,2mm downward smt no tube 10 127040-2335 dicmj-68s-spc-m05t standard 0,2mm downward smt no tray 50 127040-2303 dicmj-68s-spc-m01 standard 0,3mm downward smt no tube 10 127040-2332 dicmj-68s-spc-m01t standard 0,3mm downward smt no tray 50 127040-2330 dicmj-68s-spc-m04 standard 0,3mm downward smt no tube 10 127040-2334 dicmj-68s-spc-m04t standard 0,3mm downward smt no tray 50 127040-2386 dicmj-68s-spc-m10 standard 0,3mm downward smt yes 56mm tape & reel 2500 127040-2304 dicmj-68s-spc-m02 standard 0,5mm downward smt no tube 10 127040-2333 dicmj-68s-spc-m02t standard 0,5mm downward smt no tray 50 127040-2384 dicmj-68s-spc-m09 standard 0,6mm downward smt no tray 50 127040-2387 dicmj-68s-spc-m11 standard 0,6mm downward smt yes 56mm tape & reel 2500 note: for additional offset sizes contact cannon. 33x 1,27+0,12 (.050+.004) 1,27+0,10 (.050+.004) 41,91+0,15 (1.650+.006) no. 68 no. 34 no. 1 no. 35 44,40+0,15 (1.748+.006) 47,40+0,20 (1.866+.008) 6,00+0,10 (.236+.004) 3,00+0,10 (.118+.004) 67x 0,635 (.0250) 45,30+0,15 (1.783+.006) 42,54 (1.675) 2,00+0,10 (.079+.004) 2x 1,00+0,05 (.039+.002) no. 1 no. 35 no. 68 no. 34 42,55 (1.675) l c symm 68x 0,40 (.016) 68x 3,40 (.134) 68x 1,20 (.047) 0,64 (.025) 67x pcmcia i/o kit starcard nova tm 68 way single-sided surface mount connector C standard conforms to recommended connector and pad footprint in current pcmcia release. single-sided, single row, surface mount in-line tails/0,10 (.004) thick by 0,25 (.010) wide. incorporates pcmcia card keying at ends of insulator slots for positive cover set alignment. 68 way connector is also available with location boss. materials and finishes connectors: high performance plastic, glass fiber reinforced (30%), flame retardant ul 94v-0 rated, color: black contacts: base material beryllium copper. finish: nickel base with palladium nickel plus gold flash for contact area, solder tails tin/lead 90% tin/10% lead electrical current rating: 100 v ac rms/dc 150 v voltage: 0.5 a (per pin) dielectric withstanding voltage: 500 vrms withstanding voltage between adjacent pads operating temperature: maximum soldering temperature is 260 c for a maximum of one minute. mechanical hertzian stress: 140,000 psi minimum recommended pc board layout (non boss type) 0,36+0,05 (.014+.002) 3,30+0,10 (.130+.004) 2,70+0,10 (.106+.004) offset position n
|
